LINKO SEMICONDUCTOR CO., LTD. Booth A871 www.linkosemi.com
Exhibits
LKS08 Series MCU 
LKS08 is a series of high-performance motor-control MCU. These chips integrate instrument grade fully-differential programmable gain amplifiers and differential Analog-Digital-Converter (ADC), which could process positive/negative input signals without voltage bias. The ADC provides a 12bit resolution and 3Msps sampling rate. Voltage reference could achieve a ¡À5¡ë accuracy in full temperature range. The internal 32bit CPU and DSP are running on a clock of 96MHz. The DSP is based on a customized instruction set architecture and could be used as an independent heterogeneous core running parallelly with CPU. It is capable of performing a CORDIC/SQRT/DIV multi-cycle instruction in less than 100ns. Working temperature is between -40~105¡æ The internal RC clock could achieve a ¡À1¡ë accuracy in full temperature range. The chip has passed 6KV HBM contact ESD test and 15kV non-contact air ESD test.
LKS05 Series MCU 
LKS05 is a series of cost-efficient motor-control MCU. These chips integrate instrument grade fully-differential programmable gain amplifiers and differential Analog-Digital-Converter (ADC), which could process positive/negative input signals without voltage bias. The ADC provides a 12bit resolution and 3Msps sampling rate. Voltage reference could achieve a ¡À5¡ë accuracy in full temperature range. The internal 32bit CPU is running on a clock of 96MHz. It is capable of performing a CORDIC/SQRT task in less than 100ns. Working temperature is between -40~105¡æ The internal RC clock could achieve a ¡À1¡ë accuracy in full temperature range. The chip has passed 6KV HBM contact ESD test and 15kV non-contact air ESD test. LKS05 Series MCU provide necessary resource at a limited cost for motor-control applications.
LKS Gate driver
Linko Semiconductor could also provide competitive MOSFET, IGBT gate driver products. These chips integrate logic input signal processing unit, dead zone timing control unit, lockout circuit, level-shifter, pulse filter and output driver. They are targeting brushless motor controllers in electric bicycle, household appliance, electric power tool, and industrial control applications.
Motor & Magnetic Expo, CWEXPO (short for The 18th Shenzhen (China) International Small Motor, Electric Machinery & Magnetic Materials Exhibition, 2020 Shenzhen (China) International Coil Winding, Power Supply & Electronic Transformer Exhibition) will be held at Shenzhen Convention & Exhibition Center on July 1-3, 2020 with an area of 20,000sqm. There will be over 400 representative companies, 20,000 professional visitors and 100 purchasing groups to join in.
Click here to pre-register to Exhibit Click here to pre-register to Visit
Let us meet each at the exhibition site!
|
