Suzhou Dexingyun Intelligent Equipment Co., Ltd

Booth A859

www.dxysz.com.cn

Exhibits

DS-SSI01 Slot  Paper  Inserting  Machine

Functional characteristics:

1. Servo automatic accurate paper feeding, paper cutting;

2. Servo fast indexing positioning;

3. Servo automatic alignment center;

4.Manual loading and unloading / automatic loading and unloading by manipulator;

5.Equipment operation is simple, convenient, quick change;

6. Double Paper Plate Design Saves paper changing time.

Specification parameters:

Stator OD : ≤140mm 

Stator ID: 35-90mm

Stack length: 20-80mm 

Insulation paper width:20-70mm

Max.thickness of material: 0.188-0.3mm

Voltage: 220V/50/60HZ 

Power:  2Kw

Weight: 350kg

Machine dimension:

L1000xW650xH1600mm

Production tempo: 1S Trough

DS-S2W03 Double Station Needle Winding Machine

Functional characteristics:

1,It's suitable of BLDC motor stator winding;

2. Manual loading/unloading, Press the double start on the table board to start the machine and realize the functions of automatic winding, cutting and clamping of the stator.

3, Servo motor with Motion Controller, high-speed winding, stable wiring;

Specification parameters:

Stack length: 20-120mm

Stator OD : 70-200mm

Stator ID: 30-150mm

Stack length: 0.15-1.2mm

Speed range: 1-600RPM adjustable

Voltage: 380V/50/60HZ

Air pressure: 0.5-0.8Mpa 

Power: 15Kw 

Machine dimension: L1700*W1100*H1800mm

DS-SW03 Single Station Needle Winding Machine

Functional characteristics:

1,Single Station, three needles winding,

Manual loading/unloading, automatically

Winding, 

2,indexing, wire clamping and cuting，The slot No, turn No, indexing angle, rotation direction, etc can be set on

HMI,

3,The wire tensioner control the tension during bridge wire routing, winding wire arraying, acceleartion and deceleration.etc

Specification parameters:

Stator OD :70-150 mm

Stator ID: 30-60 mm

Stack length:10-50 mm

Wire dia:0.4-1.0 mm

Weight:750KG

Voltage:380v/50HZ

Power:7.0KW

Winding speed:1200/1000(No-loading)RPM

Air pressure: 0.4-0.7 Mpa

Machine dimension:

1100mm*1600mm*1700mm（L*W*H）

Motor & Magnetic Expo, CWEXPO (short for The 18th Shenzhen (China) International Small Motor, Electric Machinery & Magnetic Materials Exhibition, 2020 Shenzhen (China) International Coil Winding, Power Supply & Electronic Transformer Exhibition) will be held at Shenzhen Convention & Exhibition Center on July 1-3, 2020 with an area of 20,000sqm. There will be over 400 representative companies, 20,000 professional visitors and 100 purchasing groups to join in.

Click here to pre-register to Exhibit

Click here to pre-register to Visit

Let us meet each on the exhibition site!